allcomms

Hi, I bought AllComms diagnostic and I need solve the problem with my steering - I feel all bumps in my steering wheel. I changed steering pinions, arms, steering pump, air struts... Is any way to diagnostic steering pump pressure or servotronic sensor over AllCooms? Will AllComms cable...

Hi everyone, I've dug around quite a bit on this board and the rest of the internet for the past week or so and was able to find next to nothing on my issue. A few weeks ago my EAS went into hard fault mode where Check Control reads "Air Susp. Inactive" and the EAS control panel has no...

A forum member was nice enough to solve a sort term issue for me and loan me out his interface cable for the Allcomms software which got stolen out of my vehicle. However before I went to mail I back out I am still getting a cylinder 8 misfire. All spark plugs were replaced with auto lite...

Dear RR friends, have a question around the RSW allcomms. Four years ago, I bought on ebay.co.uk a used one from a guy, who had sold his RR2003 to an export dealer. Four years I have good function, but last week there was a pop-up with the updater question, and I didn´t have the e-mail adress...

Replaced my steering column and need to calibrate the steering angle sensor. I've done a good bit of wrench turning work on my Rover but nothing yet with AllComms/programming. Would someone in the FT. Worth/Dallas area be willing to help? from what I've read this is a easy procedure, but then...

recently the front right corner of my RR was bottomed out. I started it up and realized my ride height lights don't work, air susp. inactive msg, no dome lights, and no shift selector lights (P,N,D, etc) So I checked all the fuses in the glove box, in the boot, all is well there... I pulled...

Hi Guys, I am having a problem with a 2004 Range Rover, and think I have narrowed it down to the BCM Being bad. Last week I ordered and received the All Comms from RSW, and it works great, I was able to connect to the computer, no problem. The issue came up at first, because I had an oil...

Hi All, I have a 2006 RR SC and am looking to get a piece of RR specific diagnostic equipment. I'm a former audi tech and I've already got a decent OBDII scanner, but I need something for the air suspension, body controls, etc. I'm chasing an intermittent suspension inactive message right now...

Well my new All-coms came in today. There's no instructions included so really the only thing I have to go off of is the Youtube Video he posted on how to make it work. I was able to get it out of transport mode (which was worth the cost of the all-comms alone!) but I still am getting faults...

I guess I'm getting a little bit confused. I need a diagnostic tool for two reasons. 1.) to reset the Air Suspension Inactive issue 2.) to take it out of Transport Mode Do I need the $198.95 All-Comms or do I need the EAS-ABS Activate MKIII?

Gear Monitor 2 fault (on all-comms) Transmission shifting problem Coming to the experts here! 2005 Range Rover HSE with 79k miles on it. 6 months ago the truck started revving up really high when shifting from 2nd into 3rd gear. Truck would SLAM into 3rd gear then give "Trans Failsafe" on...