RangeRovers.net Forum banner

2000

  1. 2000 Land Rover, left sunroof open, all win/sunroof dead.

    Range Rover Mark II / P38
    Where is this BeCM exactly? Passenger side lower where the fuses plug into? Thanks!!!!
  2. 2000 Land Rover, left sunroof open, all win/sunroof dead.

    Range Rover Classic
    Title says it all, I did a search and note most folks point to the switch cluster or the BeCM? I pulled the switch panel, cleaned and dried it.... It appears fine.... Is the BeCM the unit that all of the fuses plug into on the lower passenger side of the front? It looks daunting...... But as I...
  3. 2000 RR Under hood ECU fan replacement

    Range Rover Mark II / P38
    My Check Engine Light is on with a P1669 code which is a faulty ecu fan/wiring and i would like to replace it on my own even though i am not very handy. How would i go about doing this? I was able to take out the ECU and disconnect the fan but im not sure how to take the fan out without breaking...
  4. 2000 4.6 V8 Vogue remote receiver query...

    Range Rover Mark II / P38
    Hi. Will a replacement remote receiver with "PA6GF30" stamped on it be a suitable replacement for my U/S original one please? It is adorned with a blue sticker on it (unsure whether this is relevant or not). Hoping a knowledgeable "fellow-forumite" will be able to advise me on this. Many...
  5. 2000 range rover remote start.

    Range Rover Mark II / P38
    Beating another dead horse, I have searched, read and downloaded the few threads related to remote start, the wirings and instructions found were nearly on spot, very little difference at lock wiring and ignition switch versus becm. that being said I am installing a crimestopper RS7-G5 FM, it...
  6. 2000 P38 Engine noise *help* please

    Range Rover Mark II / P38
    Hello, I have posted before about my Range and it has a loud, excessive noise from passenger side of engine. I took it to a local mechanic who diagnosed it as exhaust manifold, and to the Land Rover dealer and they said it was head gasket. I took a video of the noise in hopes someone has had a...
  7. 2000 4.0, Swapped BECM, no keyfob. Unable to lock with key?

    Range Rover Mark II / P38
    The BECM in my truck was acting up, so I swapped the BECM, ECU and Instrument cluster from a different truck. The new BECM came without remotes and locks, so I don't have a matching remote. I have replaced the driver door actuator with a brand new part from LR before the winter, also the fuse...
  8. Doing brakes on 2000 4.0 HSE - gotchas to watch out for?

    Range Rover Mark II / P38
    I am going to do the brakes on my 2000 4.0 HSE Bosch truck. The brakes are too far gone, will need rotors (discs) and pads for sure. The rubber seals that protect the caliper pistons are in sad shape, I am considering buying caliper rebuild kits and bleeding the brakes. Looks like the brakes...
  9. 2000 (Bosch/Thor) 4.0, US, with single exahust system?

    Range Rover Mark II / P38
    I have a 2000 4.0 HSE with Bosch engine made for US market. The exhaust system is rotten in a couple of places and needs to be replaced. Atlantic British seems to suggest that the dual system which is more money ($450 on sale, mid-section and rear section, no cats). I can get a Bosal single...
  10. 2000 model 4.6 vs. 4.0??

    Range Rover Mark II / P38
    I've had a few 4.6s and am considering pros and cons please....never had a 4.0 so I'm not sure what sacrifices to expect. Only thing I'll ever be towing is about 2200lb boat. Thanks in advance all!
  11. 2000 P38 P1667 code battery dead

    Range Rover Mark II / P38
    Hi guys I've been trying to figure out this pending code for a while now and I don't know what could be causing this. I have to jump start the rover almost daily because of the pending P1667 code. I disconnected the battery to do the spark plugs, wires and ignition coils and ever since then...
  12. Any value in a 2000 4.6 with bad motor?

    Range Rover Mark II / P38
    My 2000 4.6 has overheated awhile back. I replaced the top end gaskets and that didn’t fix the issue. It gets hot after a few miles and blows the water/coolant out of the overflow tank. we sold the 96 and trying to do something with the 2000.. sell for cheap or off to the yard. not sure if it...
  13. 2000 P38 4.0 cruise control not working

    Range Rover Mark II / P38
    I was driving on the highway and tried using the cruise control for the first time in the year that I have owned the car and it wouldn’t work. Whenever I press the set/reset button I can hear a clicking or humming sounds. Yes I know you must enable the cruise control with the button on the dash...
  14. Found a Black 2000 4.6 Vitesse

    Range Rover Mark II / P38
    Hi, new member here. I found a neglected 2000 4.6 Vitesse locally for sale, although poorly advertised. It appears authentic in Java Black, yellow turn signals, wood trim console, nav, walnut interior etc. I am having trouble finding production numbers on these, and possible value. From what I...
  15. 2000 P38 4.6 BOSCH - Coolant Leaking

    Range Rover Mark II / P38
    Hey Everyone! New to this forum and hoping to get some help. I've had some recent overheating issues with my P38. When I purchased the vehicle I was able to drive it 70+ miles (highway) with no issues. It is mainly for driving around town and not really mean't to be a road trip vehicle...
  16. 2000 P38 remote issues

    Range Rover Mark II / P38
    Dear Rangerovers net, My name is Harald van Loon and I'm a new member. Since I was young I Always wanted to have a Range Rover. Finally last year I had the opportunity to get a 2000 P38 (originally USA) and import it from England. It has been working fine till about a month ago. You can guess...
  17. Adding nav unit to 2000 hse

    Range Rover Mark II / P38
    So my Range came with a spare center binnacle with the nav unit however from the factory it didn’t have one. I’d like to use this but I don’t have the connectors on my wire harness for the lights, fog light buttons, hazard button, eas selector switch, etc. does anyone have a part number or...
  18. Hesitation at 2000 RPM

    Range Rover Mark III / L322
    ok guys im trying to chase down my hesitation at 2000 rpm in last gear and keep getting different codes but today i got afew that im not sure about these codes are from my rsw tool in transer box module 1 transfer box module/ battery under voltage 2 instr 2 lost from can ox52ED 3 instr 3 lost...
  19. 2000 RR P38

    New Member Introductions
    Hey everyone, I just picked up a 2000 Range Rover last week with 59,000 miles on it, green. Searched and found this forum and decided to sign up. -Eddie
  20. Hesitation at 2000 RPM

    Range Rover Mark III / L322
    Anyone experience a humming/vibrating hesitation at 2000rpm between 50 and 60mph. Almost feels like a bad hub bearing but i lose power up hill and if i floor it i get the eng light to flash and give me a random misfire code. i have alot of spare parts from another motor so i checked the...
Top