Range Rovers Forum banner
0305
1-12 of 41 Results
  1. Range Rover Mark III / L322
    Has anyone changed their 2003-2005 L322 door mirrors with ones from later years? Either from 2006-2009 or even 2010-2012 units? Will they physically mount and will the folding and power adjusting features still work? Beyond retaining the core functions, if there is a way to retrofit the blind...
  2. Range Rover Mark III / L322
    Hi, I have a RR L322 04. Dash board is showing air suspension inactive and HDC inactive with ABS light no. When the car is cold, this problem does not occur immediately. It occurs only after driving for 15 minutes or so. When the car is warm, this warning pops up right after I start the...
  3. Range Rover Mark III / L322
    For the past year my front/passenger low-beam HID headlight worked when it wanted to. I have swapped bulbs, ballasts and igniters but that socket only worked sporadically. I bought new bulbs, ballast & igniter to no avail. Decided my last ditch effort is to purchase a HID conversion kit from...
  4. Range Rover Mark III / L322
    Hello I'm replacing my cooler however i'm trying to find out which side of the line go to the cooler. Does the green line go on the right side and silver on left? Looking online some people have them switched around compared to the rave Diagram. Im confused;-) Thanks
  5. Range Rover Mark III / L322
    It seems like a silly question but it's been driving me nuts, my truck has a "Rough" textured black shinyish pitch black side vent color and matte black door handles which I did. I've looked around but everyone who does this goes either white or black. So, after nonsense, what is the paint for...
  6. Range Rover Mark III / L322
    Can anyone confirm for certain whether it's possible to install an 03-05 OEM wrap around brush guard on an 06+? Interference with parking sensors is irrelevant - I only care about the mounting points. I've seen conflicting info online. Thanks!
  7. Range Rover Mark III / L322
    RoverParts.com Brake Rebuild Kit Front & Rear (03'-05' HSE) Hi Guys, I am going to replace all rotors and pads on my 2003 HSE 4.4. This package seems like a great deal: http://www.roverparts.com/Parts/8825GA Has anyone ordered it before? I have searched this forum and I see mixed reviews...
  8. Range Rover Mark III / L322
    Does anyone who who manufactured the park sensors for the 04 range rover model. I fell in love with them and can't live with out them in my other vehicles. I have found them "used" but they of course require the range rover wiring to interface with. I want to put these in my audi and Nissan. 9...
  9. Range Rover Mark III / L322
    I'm tring to find a replacement tranasmission pan but my searches keep coming up with black pan. My pan is the metal one with green sticker. What other car will have the same pan the the zf 5hp24 uses. Does anyone know any bmw part numbers?
  10. Range Rover Mark III / L322
    Well after going through a bunch of junk used drive shafts (new is 1250) and also trying to find a cv joint rebuilder, I have decided to get a new 2006 drive shaft ($250 on ebay) and have an adapter plate fitted to the front cv joint which is smaller than the bmw cv joint. Has anyone tried this...
  11. Range Rover Mark III / L322
    Lots of chips on the door handle surrounds, cup holder. Can't these just be re-painted? Vent cover on the hood as well. Seems kinda silly to buy new parts when all they need is paint. Any ideas out there. Peter
  12. Range Rover Mark III / L322
    I've read on a few other sites about a software upgrade for 03-05 L322's that changes the specifications for the EAS such as the pressure the compressor operates at and relaxing the max compressor operating temperature before an error is triggered. Does anyone have any further information on...
1-12 of 41 Results
Top