Remote Key Fob programming MY 93
  1. Welcome to RangeRovers.net – General discussion forum for Range Rovers

    Welcome to RangeRovers.net - a website dedicated to all things Range Rovers.

    You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, Join RangeRovers.net today!
     
+ Reply to Thread
Results 1 to 10 of 10

Thread: Remote Key Fob programming MY 93

  1. #1
    FRESHMAN ROVER
    Join Date
    April 22nd, 2013
    Location
    Hamburg
    Posts
    5

    Remote Key Fob programming MY 93

    I have one working key fob and bought another from LR. Now I am trying to program the second one (or both). All the procedures I have found are for MY 94-95. But I need something covering MY 93.

    - I do not have a LED on the dashboard that could flash
    - If I follow the procedure for the newer model the horn doesn't beep and I can't program the remote

    Does anybody know how to do the programming for MY 1993?

    regards

    Stephan

  2. Remove Advertisements
    Range Rovers Forum
    Advertisements
     

  3. #2
    NKG
    NKG is offline
    FRESHMAN ROVER
    Join Date
    March 25th, 2008
    Location
    Hampshire UK
    Posts
    54

    Re: Remote Key Fob programming MY 93

    Hello,

    I'm hoping that I have attached a file called "Handset Installation.jpg"

    NKG
    Attached Thumbnails Attached Thumbnails Remote Key Fob programming MY 93-handset-installation.jpg  
    1993 LSE 4.2ltr

  4. #3
    FRESHMAN ROVER
    Join Date
    April 22nd, 2013
    Location
    Hamburg
    Posts
    5

    Re: Remote Key Fob programming MY 93

    Thank you for this guide. It shows the procedure for cars with an LED on the dashboard. I don't have one. And the procedure is not working.

    My vin is KAxxxxxx, so it should be a MY93. I thought the remote access and ultrasonic alarm was introduced in this year but all of the visible components are missing. No LED, no ultrasonic sensor near mirror.

    I only have this remote key fob that is opening the doors. And no idea how to program the second one.


    Stephan

  5. Remove Advertisements
    Range Rovers Forum
    Advertisements
     

  6. #4
    NKG
    NKG is offline
    FRESHMAN ROVER
    Join Date
    March 25th, 2008
    Location
    Hampshire UK
    Posts
    54

    Re: Remote Key Fob programming MY 93

    ...sorry about that, mine is the one described in the PDF. You could try these guys "https://remotekey.co.uk/". I bought my new key fob from them and they seemed to know quite a lot about it.

    NKG
    1993 LSE 4.2ltr

  7. #5
    FRESHMAN ROVER
    Join Date
    April 22nd, 2013
    Location
    Hamburg
    Posts
    5

    Re: Remote Key Fob programming MY 93

    Today it was a little warmer so I removed the lower dash panel. I found the ECU: It is AMR2591. But I can't find any information about it.

    Stephan

  8. #6
    FRESHMAN ROVER
    Join Date
    March 11th, 2018
    Location
    San Jose, CA
    Posts
    37

    Re: Remote Key Fob programming MY 93

    Is the working remote rectangular with one button? The procedure above worked on both of my 95s with the rounded, one-button remotes, but I have never gotten it to work on my 93.

    When trying to program the 93 I did find an alternate set of instructions that seemed to match the hardware in that truck. If you open the remote there is a small module similar to a SIM card inside. There is also a removable cover on the alarm module that has a slot for the card and a button next to the slot. The procedure involved taking the card out of the remote, installing it in the alarm module, then installing it back in the remote. I couldn't get it to work on mine, but I never had a working remote for it. I suspect the whole system has been disabled somehow and didn't want to mess with it potentially resulting in a truck that I could no longer start.
    Remote Key Fob programming MY 93-img_5160.jpg

    It may be worth a try if you have a working remote. The procedure was:
    1. Remove the chip from the remote and install it in the slot on the alarm module.
    2. Turn the key to the accessory position
    3. Press the black button in the alarm module next to the chip slot for 10 seconds
    4. Remove the key from the ignition
    5. Remove the chip from the alarm module and reinstall it in the remote

    If it works on yours I may have to give it another attempt on mine.
    1993 RRC SWB Beluga Black
    1995 RRC LWB Alpine White
    1995 RRC LWB Avalon Blue

  9. #7
    FRESHMAN ROVER
    Join Date
    April 22nd, 2013
    Location
    Hamburg
    Posts
    5

    Re: Remote Key Fob programming MY 93

    Yes, the working key has one button. It's the same one that is used for the later models. Part No. AMR 3723 / LUCTXTJ1.
    It has no SIM.


    Remote Key Fob programming MY 93-range-rover-classic-keyfob.jpgRemote Key Fob programming MY 93-range-rover-classic-keyfob-2.jpg
    Stephan

  10. #8
    SENIOR ROVER
    Join Date
    June 11th, 2016
    Location
    northern va 22003
    Posts
    1,412

    Re: Remote Key Fob programming MY 93

    for a 93 you have the wrong remote, the one posted on the picture is for a 95.
    https://www.keylessremotewarehouse.c...gpo_c_p896.htm

    the link provides a picture of a remote for a 1993 model.

  11. #9
    FRESHMAN ROVER
    Join Date
    April 22nd, 2013
    Location
    Hamburg
    Posts
    5

    Re: Remote Key Fob programming MY 93

    I have two identical key fobs. One is working! So it must be the correct one. The other one is brand new from JLR. And I want to program it.

    Stephan

  12. #10
    FRESHMAN ROVER
    Join Date
    March 11th, 2018
    Location
    San Jose, CA
    Posts
    37

    Re: Remote Key Fob programming MY 93

    For reference here is the card in the square style remotes that goes in the slot in the alarm module on my 1993.

    Remote Key Fob programming MY 93-img_1030.jpgRemote Key Fob programming MY 93-img_1028.jpgRemote Key Fob programming MY 93-img_1029.jpg

    The pictures Stephan posted look like the rounded ones I have working on my 1995. I agree with his assumption. If it matches one that currently works on his truck then it should work. For those I just had to get into the programming mode NKG listed. Without the LED on the dash it may be hard to tell if it is in the programming mode or not and the procedure is a little tricky. The horn honks at step 9 and that may be enough to confirm the steps worked. Typically I had to run through the procedure 4 to 8 attempts with my son working the hood switch while I did the key and door locks from the inside until we had the timing right.
    1993 RRC SWB Beluga Black
    1995 RRC LWB Alpine White
    1995 RRC LWB Avalon Blue

+ Reply to Thread

Quick Reply Quick Reply

Register Now

Similar Threads

  1. Low Battery display from Key FOB - but no Key FOB in use...
    By stevecollin in forum Range Rover Mark II / P38
    Replies: 7
    Last Post: October 7th, 2018, 11:58 PM
  2. Key Fob programming and Fob locks but wont unlock
    By AlohaRover in forum Range Rover Mark II / P38
    Replies: 12
    Last Post: June 23rd, 2016, 11:33 AM
  3. Old Key FOB Won't Unlock Doors, New Key FOB Won't Start Car... Ideas?
    By WBlackstone in forum Range Rover Mark III / L322
    Replies: 8
    Last Post: March 9th, 2013, 04:08 PM
  4. Key / FOB question - Have key blade (that was part of FOB)
    By lui2001 in forum Range Rover Mark II / P38
    Replies: 2
    Last Post: March 19th, 2009, 05:01 PM
  5. Key fob programming instructions needed
    By amil in forum Range Rover Mark III / L322
    Replies: 3
    Last Post: October 4th, 2008, 07:19 PM

Tags for this Thread

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.3.0