Tensioner bolt
  1. Welcome to RangeRovers.net – General discussion forum for Range Rovers

    Welcome to RangeRovers.net - a website dedicated to all things Range Rovers.

    You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, Join RangeRovers.net today!
     
+ Reply to Thread
Results 1 to 3 of 3

Thread: Tensioner bolt

  1. #1
    FRESHMAN ROVER diynorm's Avatar
    Join Date
    April 30th, 2016
    Location
    wisbech cambs
    Posts
    38

    Tensioner bolt

    Hello all
    Range rover p38 4.6 GEMS 1996
    Can anyone help and know the correct length of the single flanged bolt which holds the fan belt tensioner to the alternator bracket
    Took the tensioner off and some cowboy had fitted an helicoil in the bracket, which came out with the bolt.
    Panic at first, as thought it stripped the threads out of the head or timing case cover, then realised it was a separate bracket holding the alternator on.
    Found an m10 high tensil bolt, of longer length which luckily caught the last remaining threads in the housing as a temp repair
    Have found an second hand housing, and although the original bolt threads are in good condition, to me it does not come threw the other side of the tensioner that much, so not sure if someone has fitted the correct one in the past
    Thanks hopefully someone has a parts catalogue

  2. Remove Advertisements
    Range Rovers Forum
    Advertisements
     

  3. #2
    JUNIOR ROVER
    Join Date
    October 17th, 2017
    Location
    East England
    Posts
    874

    Re: Tensioner bolt

    M10 x 75mm, part number FB110151L
    96 4.6HSE
    98 4.0 Police spec
    and a number of others I maintain for the owners.

  4. #3
    FRESHMAN ROVER diynorm's Avatar
    Join Date
    April 30th, 2016
    Location
    wisbech cambs
    Posts
    38
    Brilliant thanks for the quick reply much appreciated Brian

+ Reply to Thread

Quick Reply Quick Reply

Register Now

Tags for this Thread

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.3.0