T-case output seal job, can't find part numbers...
  1. Welcome to RangeRovers.net – General discussion forum for Range Rovers

    Welcome to RangeRovers.net - a website dedicated to all things Range Rovers.

    You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, Join RangeRovers.net today!
     
+ Reply to Thread
Results 1 to 5 of 5

Thread: T-case output seal job, can't find part numbers...

  1. #1
    FRESHMAN ROVER wicksw's Avatar
    Join Date
    March 19th, 2019
    Location
    Los Angeles
    Posts
    27

    T-case output seal job, can't find part numbers...

    Replaced rear T-case output seal, want to replace nuts and such on reassemble. The seal was easy to find, but most sellers just have that listed, and not all these other things I need. Any help with part numbers would be muchly appreciated. Also, can the spline seal cause much of a leak? So much dextron on everything taking it apart, hard to tell if it was the main seal or the spline seal leaking.

    - Spline seal (RTC6363) <found that one's number

    - Output shaft flange nylock nut, the big one
    - Output shaft flange big washer under the big nut
    - Prop shaft bolts and nylock nuts
    - Case seal dust shield (this had to get bent up to remove)
    - Handbrake drum positioning screw (the posidriv one like on brake rotors)
    ---
    2001 P38 HSE 45K miles . Los Angeles, CA . old Porsches mostly, old guzzis, a mint old yamaha DT.
    Former LRs: 69 SIIA, D90, Sport SC, L322 SC
    Won the Nevada Trophy in my D90 twice back in the day

  2. Remove Advertisements
    Range Rovers Forum
    Advertisements
     

  3. #2
    FRESHMAN ROVER
    Join Date
    April 2nd, 2019
    Posts
    23

    Re: T-case output seal job, can't find part numbers...

    As below, from the NDA parts book:

    Quote Originally Posted by wicksw View Post
    - Output shaft flange nylock nut, the big one - NY112041L
    - Output shaft flange big washer under the big nut - 571468
    - Prop shaft bolts and nylock nuts - 509045P + NZ606041L
    - Case seal dust shield (this had to get bent up to remove) - 571970
    - Handbrake drum positioning screw (the posidriv one like on brake rotors) - SF108201L

  4. #3
    FRESHMAN ROVER wicksw's Avatar
    Join Date
    March 19th, 2019
    Location
    Los Angeles
    Posts
    27

    Re: T-case output seal job, can't find part numbers...

    Thanks Dtoyne!

    Has anyone ever doubled up the spline shaft seal? There seems to be room for two...we do this on old flat 6s and it really helps keep oil off the floor.
    ---
    2001 P38 HSE 45K miles . Los Angeles, CA . old Porsches mostly, old guzzis, a mint old yamaha DT.
    Former LRs: 69 SIIA, D90, Sport SC, L322 SC
    Won the Nevada Trophy in my D90 twice back in the day

  5. Remove Advertisements
    Range Rovers Forum
    Advertisements
     

  6. #4
    FRESHMAN ROVER wicksw's Avatar
    Join Date
    March 19th, 2019
    Location
    Los Angeles
    Posts
    27

    Re: T-case output seal job, can't find part numbers...

    Oh one other question, sorry. How deep is the lip on the special tool? I'm using a coffee cup that is a perfect drift. . I set the seal about 1/4" in, where the spline shaft is positioned pretty well and in a slightly new spot for the seal lip to ride on. That got me thinking about doubling them up.
    ---
    2001 P38 HSE 45K miles . Los Angeles, CA . old Porsches mostly, old guzzis, a mint old yamaha DT.
    Former LRs: 69 SIIA, D90, Sport SC, L322 SC
    Won the Nevada Trophy in my D90 twice back in the day

  7. #5
    FRESHMAN ROVER wicksw's Avatar
    Join Date
    March 19th, 2019
    Location
    Los Angeles
    Posts
    27

    Re: T-case output seal job, can't find part numbers...

    Unpopular topic I guess?
    ---
    2001 P38 HSE 45K miles . Los Angeles, CA . old Porsches mostly, old guzzis, a mint old yamaha DT.
    Former LRs: 69 SIIA, D90, Sport SC, L322 SC
    Won the Nevada Trophy in my D90 twice back in the day

+ Reply to Thread

Quick Reply Quick Reply

Register Now

Tags for this Thread

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.3.0