My name is Larry
  1. Welcome to RangeRovers.net – General discussion forum for Range Rovers

    Welcome to RangeRovers.net - a website dedicated to all things Range Rovers.

    You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, Join RangeRovers.net today!
     
+ Reply to Thread
Results 1 to 4 of 4

Thread: My name is Larry

  1. #1
    NEWBIE
    Join Date
    June 13th, 2019
    Posts
    1

    My name is Larry

    Hi everybody. I have a 96 p38. I am trying to install an Alpine aftermarket radio. I seek information about the attenuation circuit to work with my door mounted amplifiers and sub woofer.

  2. Remove Advertisements
    Range Rovers Forum
    Advertisements
     

  3. #2
    SOPHOMORE ROVER xrav22's Avatar
    Join Date
    December 15th, 2014
    Location
    Southern Ca.
    Posts
    348

    Re: My name is Larry

    I am thinking amp in each door like mine, you will need this
    My name is Larry-wp_20150117_002.jpgMy name is Larry-wp_20150127_005.jpg
    Go from aftermarkrt to low level unit (only turn the dials 25%) then to speaker and other wires.
    For the sub you go from the back of the radio to the sub speaker with this
    My name is Larry-speaker-rca.jpg
    You will ground the radio and ground the adapter if you have a humming sound
    Mine sounds incredible and I have a LR bass out at the moment.
    Good Luck!
    1997 Range Rover 4.6 HSE
    1985 Chevy Corvette 5.7 TPI
    Nano Evolution II(fixes=paid for itself)
    4x SrS reset with nano
    P0183 changed fuel temp sensor OK
    P1179 cleaned maf with maf cleaner OK
    P1314 reset CEL OK (was going thru large puddles when CEL went on).
    Service Engine reset/Adaptive values reset

  4. #3
    JUNIOR ROVER
    Join Date
    October 17th, 2017
    Location
    East England
    Posts
    874

    Re: My name is Larry

    Or save your money and build the Ray Ambler attentuators shown here https://www.rangerovers.net/rrupgrad...unitadapt.html
    96 4.6HSE
    98 4.0 Police spec
    and a number of others I maintain for the owners.

  5. Remove Advertisements
    Range Rovers Forum
    Advertisements
     

  6. #4
    SOPHOMORE ROVER
    Join Date
    November 10th, 2016
    Location
    Tasmania
    Posts
    292

    Re: My name is Larry

    I put an Alpine head unit in mine..
    You can ignore the fact that the P38 has amplifiers, just don't turn up the volume up to high.

    I cut stock plug for the radio off and soldered the Alpine one to it.
    You have to figure out yourself what goes on what, what I can remember is that the color code was not logic..

    The Alpine with the stock Harman Kardon sounds real good!!

+ Reply to Thread

Quick Reply Quick Reply

Register Now

Tags for this Thread

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.3.0