**HOW TO** EAS Valve Block ORings RenewaL
  1. Welcome to RangeRovers.net – General discussion forum for Range Rovers

    Welcome to RangeRovers.net - a website dedicated to all things Range Rovers.

    You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, Join RangeRovers.net today!
     
Closed Thread
Results 1 to 4 of 4

Thread: **HOW TO** EAS Valve Block ORings RenewaL

  1. #1
    Legacy Vendor PaulP38A's Avatar
    Join Date
    January 23rd, 2009
    Location
    Canberra, ACT, Australia
    Posts
    341

    **HOW TO** EAS Valve Block ORings RenewaL

    Hi folks

    I have just replaced all the o-rings in the EAS Valve Block using a repair kit. While preparing for the "project" I did a search for pictorial how-to's and found one on the rr.net main site. They are both excellent guides and I credit them in my own guide that I have put together at
    http://paulp38a.com/99p38a/eas-valve-block-renew/

    What I was trying to achieve with my guide is primarily a record for myself of how to put it all back together again, and it has turned in to a fairly lengthy pictorial that is specific to the P38A valve block from start to finish, or thereabouts.

    To the moderators of this site...
    If you find all or parts of the guide useful, feel free to take what you want for inclusion in your own guides or web pages. If you want to make this a sticky or host parts of the guide on the main rr.net site, I'm fine with that too.

    Hope this is useful for other P38A owners.
    Cheers, Paul.
    Last edited by RRToadHall; March 20th, 2012 at 02:59 PM.
    My toys, projects and write-ups at PaulP38a.com
    Quick reply to this message Reply  

  2. Remove Advertisements
    Range Rovers Forum
    Advertisements
     

  3. #2
    FRESHMAN ROVER
    Join Date
    August 7th, 2006
    Location
    Perth, Western Australia
    Posts
    148

    re: **HOW TO** EAS Valve Block ORings RenewaL

    Fantastic Work there mate... When I re-built mine I kept finding that the air-line keeper o-rings kept folding when I tried to seat them in the valve block. I ended up using the blunt end of a drill bit (can't remember if it was an 8mm or 6mm) and pushed them in that way, it really did the job..
    2002 Ford Series III AU XR8 Falcon
    1996 HSE Range Rover
    2006 Kawasaki ZX-14
    2005 Aprilia SR50 Factory Scooter
    1976 Leyland Mini Clubman S
    Quick reply to this message Reply  

  4. #3
    Legacy Vendor PaulP38A's Avatar
    Join Date
    January 23rd, 2009
    Location
    Canberra, ACT, Australia
    Posts
    341

    re: **HOW TO** EAS Valve Block ORings RenewaL

    Another update to the EAS Valve Block Renew/ o-ring guide at http://paulp38a.com/99p38a/eas-valve-block-renew/

    Latest version of my schematic of the EAS Valve Block attached.

    May be of assistance to folks trying to understand where things go wrong.

    Alternate download from http://paulp38a.com/gallery/d/5182-1...Block-v1_3.pdf
    Attached Files Attached Files
    My toys, projects and write-ups at PaulP38a.com
    Quick reply to this message Reply  

  5. Remove Advertisements
    Range Rovers Forum
    Advertisements
     

  6. #4
    Legacy Vendor PaulP38A's Avatar
    Join Date
    January 23rd, 2009
    Location
    Canberra, ACT, Australia
    Posts
    341

    Update to EAS Valve Block O-rings renewal guide

    As the sticky thread is locked, I'll post it here...

    I've just done an update to the EAS Valve Block Renew guide at http://paulp38a.com/99p38a/eas-valve-block-renew/ to include a new diagram showing the connections between the EAS Driver and solenoid covers... should be useful if you forget to mark the covers before removing them.

    There is also a new version of the offline version of the page (65MB download).

    Cheers, Paul.
    My toys, projects and write-ups at PaulP38a.com
    Quick reply to this message Reply  

Closed Thread

Quick Reply Quick Reply

Register Now

Similar Threads

  1. EAS Valve Block valve Numbers
    By Selby P38 in forum Range Rover Mark II / P38
    Replies: 8
    Last Post: March 30th, 2019, 07:27 AM
  2. EAS Valve Block
    By ghur in forum Range Rover Mark III / L322
    Replies: 2
    Last Post: February 11th, 2015, 07:08 PM
  3. EAS Valve Block Diaphragm Block question (In the middle of rebuild)
    By DaGlitch in forum Range Rover Mark II / P38
    Replies: 5
    Last Post: January 11th, 2015, 12:08 PM
  4. EAS Valve Block
    By Skip R in forum Range Rover Mark II / P38
    Replies: 2
    Last Post: November 11th, 2005, 06:24 AM

Tags for this Thread

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.3.0