EAS: Tank connection same as others? (collet)
  1. Welcome to RangeRovers.net – General discussion forum for Range Rovers

    Welcome to RangeRovers.net - a website dedicated to all things Range Rovers.

    You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, Join RangeRovers.net today!
     
+ Reply to Thread
Results 1 to 4 of 4

Thread: EAS: Tank connection same as others? (collet)

  1. #1
    FRESHMAN ROVER
    Join Date
    May 15th, 2007
    Location
    Oregon City, Oregon (few clicks S. of Portland)
    Posts
    233

    EAS: Tank connection same as others? (collet)

    I have looked at Rave, and in regard to air tank, it just says remove line (that's it). I am thinking that the rubber boot might be covering a standard push in collet but I didn't want to go yanking on the rubber without knowing for sure. There is also a large nut and the Rave points to that nut in the "remove air res." section. I did search too but didn't get definative answer.

    Can you guys confirm? I have a leak in either the tank or air line to the tank (most like the line, probably by the exaust...from my reading).

    Thanks!!
    Doug
    2000 4.6 Vitesse (stock as they get...for now)

  2. Remove Advertisements
    Range Rovers Forum
    Advertisements
     

  3. #2
    FOUNDING MEMBER
    Join Date
    April 22nd, 2004
    Location
    Asheville, NC
    Posts
    4,509
    yes, the collet is the same in the tank, the rubber boot covers it, you can just pull it back out of the way.

  4. #3
    JUNIOR ROVER
    Join Date
    March 28th, 2010
    Location
    COLOMBO, SRI LANKA
    Posts
    815

    Re: EAS: Tank connection same as others? (collet)

    Quote Originally Posted by shupack View Post
    yes, the collet is the same in the tank, the rubber boot covers it, you can just pull it back out of the way.
    Are there any o-rings ( of 6mm size?) with collet in the tank?
    P38 - 1997 2.5 DSE
    CLASSIC - 1982 ,2.4 VM DIESEL(In complete Project-sold)
    TOYOTA CORSA -1998, 1.5 TURBO DIESEL (sold)

    Haven't heard of Murphy's Law, go buy a RANGE ROVER.!

  5. Remove Advertisements
    Range Rovers Forum
    Advertisements
     

  6. #4
    FRESHMAN ROVER
    Join Date
    February 5th, 2019
    Location
    San Jose, CA
    Posts
    18

    Re: EAS: Tank connection same as others? (collet)

    Yes there is, two 6 mm o-rings

+ Reply to Thread

Quick Reply Quick Reply

Register Now

Similar Threads

  1. EAS-Leakage from collet
    By Edable in forum Range Rover Mark II / P38
    Replies: 6
    Last Post: May 23rd, 2011, 11:58 AM
  2. Collet plate
    By sillyboy in forum Range Rover Mark II / P38
    Replies: 7
    Last Post: April 26th, 2010, 12:17 PM
  3. Leak at top of Collet
    By medcapequip in forum Range Rover Mark II / P38
    Replies: 6
    Last Post: April 25th, 2010, 11:55 AM
  4. EAS question: Collet insertion
    By TheoR in forum Range Rover Mark II / P38
    Replies: 4
    Last Post: August 29th, 2009, 12:25 PM
  5. Collet replacement, do I have to take the spring apart?
    By kinko in forum Range Rover Mark II / P38
    Replies: 4
    Last Post: November 15th, 2007, 01:51 PM

Tags for this Thread

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.3.0