misfire after head gasket change.
  1. Welcome to RangeRovers.net – General discussion forum for Range Rovers

    Welcome to RangeRovers.net - a website dedicated to all things Range Rovers.

    You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, Join RangeRovers.net today!
     
+ Reply to Thread
Results 1 to 4 of 4

Thread: misfire after head gasket change.

  1. #1
    FRESHMAN ROVER
    Join Date
    April 7th, 2019
    Posts
    7

    misfire after head gasket change.

    Hi guys,
    I have just changed my head gasket, everything seems to be fine with coolant(little white smoke, which i heard is normal for a few miles), but i have a slight misfire/hesitation on low rpms, timing wise, i put the cylinder no1 at top dead centre, all 4 camshafts facing up(cuts in them), but i broke a bolt where exhaust attaches before the CAT, and is leaking(loud noise plus smoke), could that be the cause of the hesitation, i didn't drive it at higher speeds because of the noise. or is there something wrong with my timing?
    Thank you

  2. Remove Advertisements
    Range Rovers Forum
    Advertisements
     

  3. #2
    SENIOR ROVER 03rangiemark's Avatar
    Join Date
    November 28th, 2007
    Location
    Orlando, Fl
    Posts
    1,276

    Re: misfire after head gasket change.

    What MY is your RR? What engine is in it? Is it SC'd or normally aspirated?
    '03 Range Rover HSE
    Black
    '12 Range Rover HSE 'Lux'
    White

  4. #3
    FRESHMAN ROVER
    Join Date
    April 7th, 2019
    Posts
    7
    Haha. Sorry. My RR’s head gasket.
    Its a 2006 hse 4.4 N/A

  5. Remove Advertisements
    Range Rovers Forum
    Advertisements
     

  6. #4
    FRESHMAN ROVER
    Join Date
    April 7th, 2019
    Posts
    7
    Haha. Sorry. My RR’s head gasket. Its a 2006 hse 4.4 N/A

+ Reply to Thread

Quick Reply Quick Reply

Register Now

Similar Threads

  1. Loud rattle/smoke after head gasket change
    By sebwilde in forum Range Rover Mark II / P38
    Replies: 0
    Last Post: February 11th, 2016, 04:10 PM
  2. P38 ENGINE NOISE after head gasket and oil type change!!
    By Kaloyanchev in forum Range Rover Mark II / P38
    Replies: 5
    Last Post: November 27th, 2015, 03:47 PM
  3. Electrical Problems after a Head Gasket change
    By thejakester in forum Range Rover Mark II / P38
    Replies: 8
    Last Post: December 3rd, 2014, 08:07 PM
  4. White smoke after valve cover gasket change and oil seperator hose change
    By TwanMedleyVT in forum Range Rover Mark III / L322
    Replies: 8
    Last Post: August 27th, 2014, 05:32 PM
  5. 3.5 efi misfire with power loss...head gasket?
    By joe1972 in forum Range Rover Classic
    Replies: 1
    Last Post: June 3rd, 2010, 09:55 AM

Tags for this Thread

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.3.0