Part number for valve body seal?
  1. Welcome to RangeRovers.net – General discussion forum for Range Rovers

    Welcome to RangeRovers.net - a website dedicated to all things Range Rovers.

    You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, Join RangeRovers.net today!
     
+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 15 of 23

Thread: Part number for valve body seal?

  1. #1
    FRESHMAN ROVER
    Join Date
    June 24th, 2010
    Posts
    186

    Part number for valve body seal?

    2006 RR HSE

    Does anyone know the correct part number for the valve body seal? I have my mechatronic unit out and want to go ahead and replace the seal but I'm finding different ones and I don't want to order the wrong one.

  2. Remove Advertisements
    Range Rovers Forum
    Advertisements
     

  3. #2
    FRESHMAN ROVER
    Join Date
    June 24th, 2010
    Posts
    186

    Re: Part number for valve body seal?

    Not sure the part number but I'm picking it up from the dealer so I don't need the number now.

  4. #3
    FRESHMAN ROVER
    Join Date
    August 11th, 2013
    Location
    Staten Island, NY
    Posts
    228

    Re: Part number for valve body seal?

    Rob, did you speak to the guy from ZF/Errikson? Was he able to give you direction?
    2010 HSE

  5. Remove Advertisements
    Range Rovers Forum
    Advertisements
     

  6. #4
    FRESHMAN ROVER
    Join Date
    June 24th, 2010
    Posts
    186

    Re: Part number for valve body seal?

    Quote Originally Posted by DaveCap View Post
    Rob, did you speak to the guy from ZF/Errikson? Was he able to give you direction?
    Dave, I did and THANK YOU so much for taking time to speak with me. He described what is going on with my trans to a tee. He also told me exactly why it's happening. I'm ordering a new sleeve, the valve body seal and then putting it back together. If it works then I'll update my thread. You may have saved me a grand on this.

  7. #5
    FRESHMAN ROVER
    Join Date
    June 24th, 2010
    Posts
    186

    Re: Part number for valve body seal?

    Anyone by chance know what to torque the torx bolts on the valve body to the trans? I can't find it in the Rover shop manual. I think it's 6lbs but the part I read isn't crystal clear and I don't feel like screwing anything up.

  8. #6
    Premium Member Keralis's Avatar
    Join Date
    March 21st, 2016
    Location
    North Eastern Illinois
    Posts
    1,027

    Re: Part number for valve body seal?

    • Install the main control valve body.
      • Clean the component mating faces.
      • Install new seals.
      • Install a new seal block.
      • Tighten the Torx screws to 8 Nm (6 lb.ft).

    • Install a new electrical connector sleeve.
      • Secure with retainer.

    • Connect the electrical connector.
    • Install the fluid pan. See FLUID PAN, GASKET AND FILTER .
    • Connect the battery ground cable. Refer to Specifications .
    • Calibrate a new main control valve body using T4.
    I'm the guy that buys a chicken salad to only eat the chicken
    2017 Range Rover HSE
    2014 Range Rover Sport Dynamic

  9. #7
    FRESHMAN ROVER
    Join Date
    June 24th, 2010
    Posts
    186

    Re: Part number for valve body seal?

    What is the correct gap distance in between the electrical connector and the transmission? It seems like the guy at Ericson said 1.5-3mm. Is that correct?

  10. #8
    Premium Member Keralis's Avatar
    Join Date
    March 21st, 2016
    Location
    North Eastern Illinois
    Posts
    1,027

    Re: Part number for valve body seal?

    There is no specification for this from Land Rover. Do it hand tight, whatever that comes out to, as long as it doesn't leak you'll be fine.
    I'm the guy that buys a chicken salad to only eat the chicken
    2017 Range Rover HSE
    2014 Range Rover Sport Dynamic

  11. #9
    FRESHMAN ROVER
    Join Date
    August 11th, 2013
    Location
    Staten Island, NY
    Posts
    228

    Re: Part number for valve body seal?

    Part number for valve body seal?-img_9851.jpg

    You can get the whole procedure here......
    http://www.zftranspart.com/images/custom/mecha.pdf
    2010 HSE

  12. #10
    FRESHMAN ROVER
    Join Date
    August 11th, 2013
    Location
    Staten Island, NY
    Posts
    228

    Re: Part number for valve body seal?

    That first one got cropped for some reason. If you right click on it and open it, you'll see what got cropped out.
    Attached Thumbnails Attached Thumbnails Part number for valve body seal?-mech.jpg  
    2010 HSE

  13. #11
    FRESHMAN ROVER
    Join Date
    June 24th, 2010
    Posts
    186

    Re: Part number for valve body seal?

    I know it says wait until the trans fluid is 40C before checking it after putting fluid in. If none comes out then add until a small stream comes out. Is there a temp that's too high to add? I thought you didn't want it to be over 50C but I don't see that on the pdf. I want to make sure I get everything perfect.(just in case I do have to go back and buy a new mechatronic unit I'll know it wasn't on my end.

  14. #12
    FRESHMAN ROVER
    Join Date
    August 11th, 2013
    Location
    Staten Island, NY
    Posts
    228
    Sorry, I’m not sure about that one.
    2010 HSE

  15. #13
    Premium Member Keralis's Avatar
    Join Date
    March 21st, 2016
    Location
    North Eastern Illinois
    Posts
    1,027

    Re: Part number for valve body seal?

    operating temperature is where you must put fluid in.. whatever that is after driving, that's what I'd leave it as.

    A small stream is fine if it is very small, almost to a drip.
    I'm the guy that buys a chicken salad to only eat the chicken
    2017 Range Rover HSE
    2014 Range Rover Sport Dynamic

  16. #14
    JUNIOR ROVER MARK_C's Avatar
    Join Date
    January 20th, 2015
    Location
    Shrewsbury, MA
    Posts
    796

    Re: Part number for valve body seal?

    Here's the instructions striaght from ZF
    Part number for valve body seal?-pages-zf-oil-change-parts_u_page_1.jpg
    Part number for valve body seal?-pages-zf-oil-change-parts_u_page_2.jpg
    Part number for valve body seal?-pages-zf-oil-change-parts_u_page_3.jpg
    M Canning
    Massachusetts, USA
    2006 HSE Bonnati Grey/Charcoal Interior

  17. #15
    FRESHMAN ROVER
    Join Date
    June 24th, 2010
    Posts
    186

    Re: Part number for valve body seal?

    Mark, thank you. I've never seen it that detailed before. Will get it done this weekend if I can get my Rover level. Kind of hard with the issues I'm having with my suspension and I only have 2 jack stands.

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Quick Reply Quick Reply

Register Now

Similar Threads

  1. Does any one have a part number? Rear number tow eye cover/t
    By Rodeo360 in forum Range Rover Sport II / L494
    Replies: 1
    Last Post: September 3rd, 2018, 11:26 AM
  2. Help with part number - throttle body to intake hose seal
    By mambo in forum Range Rover Mark III / L322
    Replies: 2
    Last Post: May 23rd, 2015, 11:24 AM
  3. Valve Stem Seal part #
    By ARMYBOB in forum Range Rover Classic
    Replies: 5
    Last Post: November 12th, 2014, 10:39 AM
  4. valve block to compressor air pipe part number PN?
    By 996TURBO in forum Range Rover Mark II / P38
    Replies: 3
    Last Post: October 10th, 2008, 09:39 AM

Tags for this Thread

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.3.0