Brembo upgrade on non-brembo HSE
  1. Welcome to RangeRovers.net – General discussion forum for Range Rovers

    Welcome to RangeRovers.net - a website dedicated to all things Range Rovers.

    You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, Join RangeRovers.net today!
     
+ Reply to Thread
Results 1 to 3 of 3

Thread: Brembo upgrade on non-brembo HSE

  1. #1
    FRESHMAN ROVER
    Join Date
    July 10th, 2019
    Location
    Fort Lauderdale Florida
    Posts
    5

    Brembo upgrade on non-brembo HSE

    I have an 3.0 Diesel HSE and the brakes are a bit to be desired. Low pedal feel and poor stopping quality. It brakes well, there are no vacuum problems, but "she is heavy" so who knows. I'm used to Jag Supercharged braking.

    Can I swap a Brembo setup from a SC Range Rover or Sport? Will they bolt up to the existing knuckles? Any other items needed?

    So if they will bolt up......I know I'll need the Calipers, Rotors, and rear splash guards. Anything else I'm not thinking about?

  2. Remove Advertisements
    Range Rovers Forum
    Advertisements
     

  3. #2
    JUNIOR ROVER Hodog16's Avatar
    Join Date
    July 3rd, 2013
    Location
    NC
    Posts
    973

    Re: Brembo upgrade on non-brembo HSE

    I believe it will work, just based on the fact that euroactive sells a set for $4-5k, and I believe they say an upgrade is possible.

    Last piece of the puzzle is to make sure your rims will fit over the Brembos, I believe it's 20" or larger but definitely double check everything.
    2016 Range Rover Sport SCV8 Dynamic - Firenze Red/Pimento
    2018 Honda Odyssey Elite - Obsidian Blue/Gray

  4. #3
    FRESHMAN ROVER
    Join Date
    July 10th, 2019
    Location
    Fort Lauderdale Florida
    Posts
    5

    Re: Brembo upgrade on non-brembo HSE

    I have 22x9.5's, so should fit. Had that issue with my Touareg v10, Brembo needs at least 19's. Can't seem to get backing plates cheap, so I may have to get creative with a slege hammer. FYI, junk yards sell the setup for about $1000 with rotors and brake lines. They won't sell backing plates without the front suspension.Brembo upgrade on non-brembo HSE-20190408232813075_dsc03526.jpg

+ Reply to Thread

Quick Reply Quick Reply

Register Now

Tags for this Thread

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.3.0